Templates › Two-Piece Box with Lid
Two-Piece Box with Lid Template Generator
A two-piece box is a base tray plus a slightly larger lid that slides over it. This generator draws both parts at once and sizes the lid from the clearance you choose.
Default size shown. Enable JavaScript to enter your own dimensions and download files.
Dimensions
| Setting | Default | What it controls |
|---|---|---|
| Length | 100 mm (3.94 in) | Inside length of the base. |
| Width | 70 mm (2.76 in) | Inside width of the base. |
| Base height | 40 mm (1.57 in) | Wall height of the base. |
| Lid height | 20 mm (0.79 in) | Wall height of the lid. |
| Lid clearance | 1.5 mm (0.06 in) | Extra size added to the lid on each side so it slides on. |
| Glue tab | 12 mm (0.47 in) | Width of the glue flap. |
With the default settings the flat sheet measures 333 × 150 mm (13.11 × 5.91 in).
What it is used for
- Gift boxes for jewellery, chocolates and clothing
- Photo and keepsake boxes
- Premium product packaging
- Stationery and card sets
How to assemble it
- Cut out both pieces and score the dashed lines.
- Assemble the base: fold the walls up and glue the four corner tabs.
- Assemble the lid the same way.
- Let the glue set before sliding the lid on.
Good to know
A lid clearance of 1 to 2 mm per side works for most cardstock. Use the larger value for thick board or wrapped paper. A lid as tall as the base gives a full telescoping box.
Questions
Are the templates free to use?
Yes. Every template is free to download and you can use the files for personal and commercial projects, including products you sell.
Which file should I download?
Use the PDF to print and cut by hand, the SVG for cutting machines such as Cricut and Silhouette or for adding artwork in Illustrator, Inkscape or Affinity, and the DXF for CAD software, laser cutters and plotters.
How do I print at the correct size?
Print the PDF at 100% or “actual size”, not “fit to page”. Each PDF includes a 50 mm bar you can measure to confirm the scale.
What do the lines mean?
Solid black lines are cut lines. Dashed red lines are folds: score them with a blunt tool before folding. In the SVG and DXF the two kinds of line are in separate groups or layers called cut and fold.
What paper should I use?
Cardstock between 200 and 300 gsm suits most small boxes. Use lighter paper for envelopes and sleeves, and heavier board for boxes longer than about 200 mm.
More templates
Tuck End Box · Open Tray Box · Pillow Box · Envelope · Box Sleeve · Matchbox (Drawer Box) · Pyramid Box · Cone & Truncated Cone · Table Tent Card · Triangular Prism Box · Hexagonal Box · CD Sleeve & Square Pocket